HjemFlyEl.fly-pakkerFlypakker uten radio
Print produktark

E-Flite Timber X 1.2m PNP

Handle nå, del opp eller betal senere. Walley Les mer
kr 3.895,-
0|0|633
VareID: 43642, Produktnr: EFL3875
LoadWalleyWidget
Overvåk varen
E-Flite Timber X 1.2m PNP
Få beskjed når varen er tilgjengelig
Registrere deg, og få mail når varen er på lager. Beskjeden er kun en vennlig påminnelse, og gir ingen forpliktelser til kjøp.
Din e-postadresse Med melding

Gi meg beskjed
Produktinfo
Anbefalt tilbehør
Deler
Tips en venn
Anmeldelser

Produktinformasjon

3D modell med STOL (Short Takeoff and Landing)
PNP (Plug n' Play)
1.2m vingespenn
Timber X en ny vri av den populære Timber modellen fra Horizon, Timber X har kortere vingespenn, store ailerons og ror. Kompatibel med 4s LiPo oppsett. Leveres her i PNP (Plug n Play) utgave og nødvendig tilbehør er listet nedenfor. Beregnet monteringstid er under 1 time.

Anbefalt tilbehør

PS! Produkt kan avvike fra video.Les merKlippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.

OK
E-Flite Timber X 1.2m PNP

Nødvendig tilbehør
  • Radio og mottaker med "full range" og 5+ kanaler
  • 2200-3200mAh 3-4s LiPo batteri med EC3 kontakt
  • Kompatibel lader

  • Spesifikasjoenr
    Lengde1055mm
    Vingespenn1200mm
    Vekt1613-2698g
    MaterialeEPO

    OBS!
    Batterier under anbefalt tilbehør leveres med Deans/T-plug kontakt, en overgang er nødvendig for at batteriene skal passe i modellen.
    Product details in english
    The original Timber® captured the thrill of incredible Short Takeoff and Landing (STOL) capabilities in a design featuring sporty flight performance and ultra-friendly handling. From low-time to very experienced pilots, nearly everyone enjoys flying the Timber-but some wish it had even more aerobatic capability. The E-flite® Timber X 1.2m combines the STOL capabilities of the original model with a new wing design featuring oversized ailerons and flaps, plus an enlarged rudder and elevator and a more powerful 3S and 4S compatible power system, to also deliver 3D performance youd expect from an all-out aerobat!

    Key Features
  • Incredible Short Takeoff and Landing (STOL) plus 3D capabilities
  • Enlarged and oversized control surfaces with double-beveled hinge lines
  • Six durable and factory-installed high-torque, metal-geared servos
  • High-power 3S and 4S compatible brushless outrunner motor and 50-amp ESC
  • Shock-absorbing landing gear with oversized tundra-style wheels
  • Functional and factory-installed LED landing, navigation and strobe lights
  • Lightweight yet durable composite-reinforced, hollow-core EPO construction
  • Optional-use leading edge slats for improved STOL and slow flight performance
  • Optional EDO-style floats (EFL5261, sold separately)

  • Needed to Complete
  • Full-range, 5+ channel transmitter and receiver
  • 2200-3200mAh 3-4S LiPo flight battery
  • Compatible LiPo charger

  • Whats in the Box?
  • (1) E-flite Timber X 1.2m with
  • (1) 50A Brushless ESC
  • (1) Brushless Outrunner Motor
  • (6) High-Torque, Metal-Geared Servos
  • (1) Set of Optional-Use Leading Edge Slats
  • (1) Product Manual

  • Overview
    The E-flite Timber X 1.2m unleashes a new era of STOL plus 3D aerobatic capability. Based on the extremely popular Timber 1.5m model but featuring a new wing design, oversized control surfaces plus a 3S and 4S compatible power system, it offers an even wider flight envelope to deliver a truly "mild to wild" experience. Hollow-core EPO construction with composite reinforcement results in a lightweight yet strong airframe thats capable of handling extreme aerobatic maneuvers while keeping the wing loading low for impressive Short Takeoff and Landing (STOL) and slow flight performance. Its also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear of the original model so you can fly as aggressively as you want from almost any surface. You can even install the included leading edge slats for improved slow flight performance, or the optional floats (EFL5261, sold separately) so you can fly from water. Add in the LED landing, navigation and strobe lights plus many of the other popular features of the original, and the Timber X is a model almost every pilot can appreciate and enjoy!

    Plug-N-Play® Completion Level
    This Plug-N-Play (PNP) model comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly, and fly!

    eXtreme Maneuverability
    The Timber X 1.2m features a new wing design with a shortened span plus much larger ailerons and flaps, along with an enlarged elevator and rudder. Double-beveled hinge lines make it possible to deflect every control surface, including the flaps that can now travel in both directions, to high angles for outstanding control and eXtreme 3D aerobatic capability. Pockets in the rear of the fuselage and the included optional-use steel stabilizer joiner give you additional options to fine-tune the models performance for even wilder 3D setups- or on low rates the controls can be as smooth and docile as they are on the original so you can fly as mild or as wild as youŽd like!

    eXtra Power
    The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and prop that deliver an abundance of thrust with a 3S LiPo battery, or eXtra power and vertical performance with a 4S battery without the need for any modifications or upgrades.

    eXtremely Durable
    Composite-reinforced, hollow-core construction with EPO material delivers a lightweight yet durable airframe. The Timber X 1.2m is also equipped with high-torque, metal-geared servos plus the shock-absorbing landing gear and oversized tundra-style wheels of the original model so you can fly aggressively from almost any surface.

    STOL (Short Takeoff and Landing) Capable
    The new wing design has a shorter span yet almost as much wing area as the original, plus it features drooped wingtips and can be equipped with the included optional-use leading edge slats for improved slow flight and STOL performance. These features, along with the lightweight design, oversized flaps and high-power brushless motor make it possible to spring into the air or float down to land in as little as two feet or less.

    LED Lights
    Like the original, the Timber X 1.2m comes with realistic-looking LED landing, navigation, and strobe lights that are factory-installed and powered from the flight battery.

    Optional Floats
    Owners of an original Timber 1.5m model can use the float set it came with on the Timber X 1.2m, or the EDO-style float set is available separately and includes the required mounting struts plus a dual-rudder steering system for excellent handling and easy takeoffs and landings on water.
    Mer info på Engelsk

    Anbefalt tilbehør

    Bronto LiPo-Safe Bag / Transportbag (M)
    3|248|523
    kr 165,-
    Bronto Lipo-Safe Bag 30x23cm (L)
    3|429|523
    kr 129,-
    Bronto Lipo-Safe Bag (185x75x60mm) (S)
    3|272|523
    kr 135,-
    SkyRC S100 Neo Computerlader AC100W/DC200W
    3|216|235
    kr 699,-
    EFL5261 Float Set : Timber
    3|2|88
    kr 549,-
    SkyRC E680 12/220V 80W Computerlader
    0|0|235
    kr 699,-

    Produktanmeldelser

    Timber x 1,2m
    Bruker ga kun karakter
    26.02.2022 av Roger11thorkildsen
    Flyr fint
    Dette hjalp meg 10 3
    Viser 1 / 1 tilbakemeldinger
    Gi din tilbakemelding

    Flere så også på