-17%
HjemDroner for FPV RaceRace dronerFPV Racers Ferdigbygget
Print produktark

iFlight ProTek35 6S HD Polar - BNF Vista

Handle nå, del opp eller betal senere. Walley Les mer
kr 4.995,-
5995| 5.995,-
3|1|1124
VareID: 54781, Produktnr: C010954
LoadWalleyWidget
Produktinfo
Anbefalt tilbehør
Tips en venn
Anmeldelser

Produktinformasjon

Flight ProTek35 leveres her med 2500KV Xing 2205-motorer for 6S LiPo. DJI Vista og Caddx Polar HD kamera ferdig montert så her er det meste klart. Modellen er forhåndstunet for smooth flyving og med T700-karbon så har man også en ramme som er meget stiv og holdbar.

Anbefalt tilbehør

Batteri, lader, radio og FPV-briller må kjøpes separat, se anbefalt tilbehør.

iFlight ProTek35 6S HD Polar - BNF Vista

GoPro og gopro--mount følger ikke med.

iFlight ProTek35 6S HD Polar - BNF Vista

Inkludert i pakken:
  • Protek35-ramme
  • Caddx HD Polar
  • 1 x Albatross LHCP Antenna ipex 170mm
  • 2 x Nazgul 3535-propell-sett
  • 1 x TPU Naked Gopro Bottom Stand
  • 2x iFlight batteristropp
  • 4x XING 2205 motorer
  • 1x TPU Bracket for Nebula Air Unit.
  • Beast Whoop F7 AIO 55A V2


  • Nødvendig tilbehør:
  • Batteri 6S +-1300mAh XT60
  • FPV Goggles
  • Radio
  • Lader
  • Spesifikasjoner
    Wheelbase151mm
    Bunnplate3,5mm
    Toppplate2mm
    Vekt348.3g uten batteri
    Product details in english
    After our very popular 3inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.

    Our all new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what were talking about here...

    ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves.

    A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).

    Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.

    ProTek35 Prop Guards V2.0

  • No Props or frame in view!
  • High performance True-AIO Board Beast Whoop F7 AIO 55A to save weight and space
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • Caddx Polar Vista Digital HD System
  • Butter smooth 2205 2205 2300KV (6S)
  • Pre-tuned with smooth freestyle settings


  • Specs

    *Board Beast Whoop F7 AIO 55A (LINK)
    *Motor: XING 2203.5 3600KV (4S) (LINK) / XING 2205 2300KV (6S) (LINK)
    *Wheelbase: 151mm
    *Body Size: 118*94.5mmmm
    *Bottom plate thickness: 3.5mm
    *Top plate thickness: 2mm
    *Top and bottom plate spacing: 20mm (aluminum standoff height)
    *Propeller size: 3.5 inch
    *FC pattern: 25.5*25.5mm / 20*20mmmm
    *FPV cam spacing: 20mm
    *Weight: 348.3g (without battery)

    ProTek35 HD Quad BNF Included Components and Parts

    1 x ProTek35 Frame
    1 x Caddx Polar Vista Digital HD System Kit
    1 x Albatross LHCP Antenna ipex 170mm
    1 x TPU Bracket for Nebula Nano Air Unit
    1 x TPU Antenna holder
    2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)
    1 x iFlight Lipo Strap 15*150mm (Color May Vary)
    1 x iFlight Lipo Strap 15*250mm (Color May Vary)
    1 x GoPro TPU bottom stand black (GoPro Protector not included)

    Beast F7 AIO 55A V2

    MCU: BGA-STM32F745
    MCU: BGA-STM32F745
    Gyro: BMI270
    Blackbox: 16MB Onboard Flash
    BEC output: 5V 2.5A
    Barometer: DPS310
    Connector: Micro-USB
    OSD: IFLIGHT OSD (AT745E?
    FC Firmware?IFLIGHT_F745_AIO_V2
    Mounting pattern: 25.5*25.5mm ?3mm
    Dimensions: 32.5*32.5mm
    Weight: 8.5g

    ESC: 55A 2-6s

    Uarts: 5
    Current Sensor: Yes
    Input: 2-6S LIPO
    Current scale: 100
    Constant: 55A / Burst: 60A
    BLHeli: BLHeli-S
    Telemetry: no
    ESC Firmware: G-H-30 BLS
    Mounting pattern: 25.5*25.5mm/?3mm
    Dimensions:?32.5*32.5mm
    Mer info på Engelsk

    Anbefalt tilbehør

    SkyRC T200 12/220V 2x100W Computerlader
    3|68|235
    kr 1.399,-
    Torvol Lipo Safe Bag
    3|20|891
    kr 399,-
    SkyRC S100 Neo Computerlader AC100W/DC200W
    3|216|235
    kr 699,-
    SkyRC E680 12/220V 80W Computerlader
    0|0|235
    kr 699,-
    6s 1300mAh -100C - Gens Ace FunFly XT60
    0|0|259
    kr 399,-

    Produktanmeldelser

    Desverre ingen tilbakemeldinger på dette produktet enda.

    Gi din tilbakemelding
    Produkt
    iFlight ProTek35 6S HD Polar - BNF Vista
    Velg karakter
    Overskrift
    Produktanmeldelse
    Logg inn her
    Retningslinjer
    Produktanmeldelser er ment for at du skal dele din erfaring med andre som søker kunnskap om produktet.
    Urelevant, uriktig eller støtende innhold vil bli fjernet.

    Spørsmål, reklamasjoner e.l: kontakt oss direkte
    Flere så også på