Print produktark

ImpulseRC ApexDC FPV 5inch DeadCat Frame

Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
LoadWalleyWidget
Produktinfo
Anbefalt tilbehør
Tips en venn
Anmeldelser

Produktinformasjon

ImpulseRC Apex FPV ramme for 5inch elektrooppsett. Dette er kun ramme så all elektronikk må kjøpes i tillegg. Laget for Caddx/DJI Vista enhet.

Anbefalt tilbehør

Product details in english
DESIGNED IN COLLABORATION WITH MR STEELE, THE APEXDC BRINGS IMPROVEMENTS TO THE CLASSIC DEAD CAT GEOMETRY FOR FREESTYLE, VIDEOGRAPHY AND MID-RANGE EXPLORATION.

UNIQUE ARM GEOMETRY
The Apex DC is a variation on the typical dead cat frame which we have modified to keep the front and rear motors aligned, allowing us to maintain the much loved compressed-x geometry in the motor layout.

This ensures the frame remains balanced and flight characteristics are not compromised, unlike the classic dead cat design which moves the rear motors closer to the body and severely impacts handling.

By modifying only the upper and lower main plates we retained full compatiblity with regular Apex arms, using standard 5" arms at the front and standard 6" arms at the back.

There are no props in shot of DJI HD flight cameras and for slower cinematic flying its now possible to run GoPro angles lower than ever before.

CADDX VISTA ISOLATION
A major drawback of the Caddx Vista system is that the body of the unit is grounded, this can cause the conductive carbon fiber plates and frame hardware to be grounded too. In an ideal world this is not necessarily a problem, however in the real world its an accident waiting to happen.

Alongside the required M2 mounting hardware for the Vista, we also include a die-cut mylar insulator and custom machined cone rivets from non-conductive POM.

When installed the Caddx Vista and also the M2 hardware is electrically isolated from the frame. This solution adds only 0.5g of extra weight compared to other designs using bulky and heavy 3D prints.

DJI HD CAMERA ISOLATION
Like the Caddx Vista itself, certain DJI HD cameras can also ground the frame, with similar unfortunate consequences.

Included with the ApexDC are newly redesigned HD camera plates and 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame

APEXDC KIT CONTENTS
Carbon fiber frame parts
Hardware and standoffs
Mylar and POM Vista isolation parts
Vista antenna mount
injection molded skids and bumper
injection molded wire covers
Rubber and velcro battery pads
Diamond files
Battery strap
Mer info på Engelsk

Anbefalt tilbehør

6s 1200mAh -100C - SpeedyPizzaDrones XT60
3|125|259
kr 349,-
6s 1300mAh -130C- Gens Ace Tattu R-Line 4.0 XT60
3|61|259
kr 489,-
6s 1550mAh -100C - Gens Ace FunFly XT60
3|24|259
kr 499,-

Produktanmeldelser

Desverre ingen tilbakemeldinger på dette produktet enda.

Gi din tilbakemelding
Produkt
ImpulseRC ApexDC FPV 5inch DeadCat Frame
Velg karakter
Overskrift
Produktanmeldelse
Logg inn her
Retningslinjer
Produktanmeldelser er ment for at du skal dele din erfaring med andre som søker kunnskap om produktet.
Urelevant, uriktig eller støtende innhold vil bli fjernet.

Spørsmål, reklamasjoner e.l: kontakt oss direkte
Flere så også på