HjemRadioutstyrØvrig radioutstyrStrømsystemer
Print produktark

PowerBox Evo incl. MicroSwitch

Tilhører kategori
Strømsystemer
Handle nå, del opp eller betal senere. Walley Les mer
kr 2.995,-
3|1|172
VareID: 59663, Produktnr: PB-4250
LoadWalleyWidget
Produktinfo
Tips en venn
Anmeldelser

Produktinformasjon

7 kanals
Med bryter
Kraftig
7 kanals PowerBox med bryter
Spenningsområde4.0-9.0V
Strømforsyning2S LiPo, 2S LiIon, 2S LiFePo, 5S NiMH
Strømtrekk påslått66mA
Strømtrekk i standby8mikroA
Max effekt2x10A Kontinuerlig. 2x40A (<30s)
Spenning ut6.0V, 7.4V, 7.8V, uregulert
Signal innPWM
Product details in english
Features
7 channels
10 outputs
High-performance battery backer with high continuous load capacity
All power electronics duplicated
Redundant electronic switch
Four selectable output voltages: 6.0V, 7.4V, 7.8V or unregulated

Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum, SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT
All features can be controlled from PowerBox and Jeti transmitters
Signal amplification for all 10 outputs
Voltage indication by means of tri-colour LEDs
Supports four battery types: LiPo, LiIon, NiMh/NiCd, LiFe
Servo feedback current suppression
Machined high-performance heat-sink for optimised heat dissipation
Machined, anodised aluminium switch case
Compact format

Set contents
PowerBox Evo
MicroSwitch
8x patch leads
6x fixing screws
4x rubber grommets and brass sleeves
Operating instructions

Product description
The PowerBox Evo is an ultra-compact dual power supply featuring 7 channels, regulated output voltage and telemetry.

The 7 inputs are assigned to 10 outputs, allowing two servos to be controlled in parallel on each of 3 channels, without requiring additional Y-leads. All servo outputs have integral signal amplification and are protected against servo feedback currents.

The PowerBox MicroSwitch included in the set is not subject to wear, and operates both electronic switches reliably. It is also used to set the output voltage and the battery type.

By default the two high-performance voltage regulators deliver 6.0V, but that value can easily be changed to 7.4V, 7.8V or no regulation at all using the PowerBox MicroSwitch.

The machined aluminium heat-sink ensures a high continuous load capacity.

The PowerBox Evo supports all current telemetry systems: PowerBox, Jeti, Futaba, Multiplex, Graupner, Spektrum and JR, which means that the voltage of both batteries can be monitored conveniently from the transmitter. It is also possible to read off the state of charge of the batteries at any time using the two tri-colour LEDs.
Mer info på Engelsk
Flere så også på