HjemDroner for FPV RaceRace dronerFPV Rammer
Print produktark

ImpulseRC Apex FPV 5inch EVO DC Frame

Tilhører kategori
FPV Rammer
Handle nå, del opp eller betal senere. Walley Les mer
kr 1.349,-
3|4|1176
VareID: 60729
LoadWalleyWidget
Produktinfo
Deler
Tips en venn
Anmeldelser

Produktinformasjon

Deadcat varian
5inch
Ramme
ImpulseRC Apex FPV ramme for 5inch elektrooppsett. Denne rammen er en deadcat/true-x variant. Dette er kun ramme så all elektronikk må kjøpes i tillegg.
Kommer med
  • Modifisert deadcat variant men med parallele motorer foran og bak
  • 5" armer foran og 6" armer bak
  • DJI HD kompatibel
  • Alu kamera mount med TPU inserts med 4 ulike kameraposisjoner
  • Kommer med mounting hardware for Cassx Vusta (M2) og DJI O3 (M1.6)
  • TPU antenne mounting for HD-systemer


  • Innholdsliste
    Carbon fiber frame parts
    Hardware and standoffs
    Aluminium and TPU camera mount
    Mylar and POM HD video isolation parts
    HD video antenna mount
    Injection molded skids and bumper
    Injection molded wire covers
    Rubber and velcro battery pads
    Diamond files
    Battery strap
    Product details in english
    UNIQUE ARM GEOMETRY
    The ApexDC EVO is a variation on the typical dead cat frame which we have modified to keep the front and rear motors aligned, allowing us to maintain the much loved compressed-x geometry in the motor layout.

    This ensures the frame remains balanced and flight characteristics are not compromised, unlike the classic dead cat design which moves the rear motors closer to the body and severely impacts handling.

    By modifying only the upper and lower main plates we retained full compatibility with regular Apex arms, using standard 5" arms at the front and standard 6" arms at the back. There are no props in shot of DJI HD flight cameras and for slower cinematic flying its now possible to run GoPro angles lower than ever before.

    CAMERA MOUNTIncluded with the ApexDC EVO is a newly redesigned aluminium camera mount and 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.

    With the many different HD and analog cameras on the market there is a large variation between models in the distance from the front of the lens to the mounting bolts. To give the camera the best possible protection, whilst also keeping the frame out of shot, it is critical to be able to adjust the position of the camera forwards and backwards within the frame.

    By rotating the TPU inserts 180 degrees, as well as alternating between using the upper or lower bolt as the pivot point, the EVO camera mount has 4 possible mounting positions each 2mm apart.

    CUSTOM GOPRO MOUNTING
    For quick angle changes while filming, not many mounts can beat the standard GoPro tab and slot design. However the stock GoPro bolt leaves a lot to be desired for FPV use.

    Included with the Mr Steele version of the ApexLR is not only a 3D printed mount, but also a new custom designed bolt, specifically for FPV use.
    Our new bolt is machined from aluminium for substantial weight savings and has an 8mm hex on the outside, along with an internal 2.5mm hex broach.
    Make quick changes to your GoPro angle using either the standard hex driver for M3 bolts, or the prop tool for M5 nuts, which you already have with you in your flight bag.

    HD VIDEO SYSTEM ISOLATION
    A major drawback of the some modern HD video systems is that the body of the unit is grounded, this can cause the conductive carbon fiber plates and frame hardware to be grounded too. In an ideal world this is not necessarily a problem, however in the real world its an accident waiting to happen.

    Alongside the required M2 mounting hardware for the Caddx Vista and M1.6 hardware for the DJI O3, we also include a die-cut mylar insulator and custom machined cone rivets from non-conductive POM.

    When installed your HD video system, and also the mounting hardware, is electrically isolated from the frame. This solution adds only 0.5g of extra weight compared to other designs using bulky and heavy 3D prints.

    ANTENNA MOUNTING
    Included in every kit is a 3D printed antenna mount for the your HD video system or other similar antennas.
    Mer info på Engelsk
    Flere så også på