Print produktark

SkyRC 6X80+ 80W 220V/12V Computerlader Blue

Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Anbefalt tilbehør
Tips en venn
Anmeldelser

Produktinformasjon

Brukervennlig multilader
Innebygget batterimåler, servotester og rpm-tester
80W/50W
Dette er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W ved 12V input, og 50W ved 220V input, og kan lade med maks 10A. Det spesielle med denne laderen er at den har innebygget Bluetooth, og dermed kan man kontrollere lading fra telefon, og lese ut all mulig informasjon fra batteriet, i displayet på telefonen. Laderen har også flere funksjoner innebygget som batterimåler, servotester, motor rpm-tester osv.

Anbefalt tilbehør

SkyRC 6X80+ 80W 220V/12V Computerlader Blue
Dette er en god multilader som kan lade LiPo, LiFe, LiIon, NiHm, NiCd og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W ved bruk av 12V input, så ett 2cell LiPo kan da lades på ca 10A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på 3,2A. Ved 220V input er de respektive maks ladestyrkene for 2,3 og 6S LiPo 7,6A, 4,5A og 2A.

Viktig info!
Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.

Spesifikasjoner:
Innspenning AC/DC:100-240V/11-18V
Ladestyrke:0.1-10A
Utladnings styrke:0.1-5A
Effekt AC/DC:80W/50W
Antall celler LiPo:1-6S
Antall celler NiMH:1-15S
Størrelse:135x112x60.9mm
Vekt:525gram
Product details in english
Specifications
  • AC Input: 100-240Volt
  • DC Input: 11-18Volt
  • Circuit Power: Max. Charge Power 80W/AC - 50W/DC
  • Max. Discharge Power 8W
  • Charge Current Range: 0.1-10.0A
  • Discharge Current Range: 0.1-5.0A
  • Current Drain For Balancing LiPo: 200mA/cell
  • NiCd/NiMH Battery Cell Count: 1-15Cells
  • LiPo/LiFe/Lilon Cell Count: 1-6Cells
  • Pb battery voltage: 2-20V
  • Net Weight: 525g
  • Dimension: 135x112x60.9mm


  • Optimized operating software
    SKYRC 6x80 Plus features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the users fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!

    Internal Independent Lithium Battery Balancer
    SKYRC 6x80 Plus employs an individual-cell-voltage balancer. It isnt necessary to connect an external balancer for balance charging.

    Balancing Individual Cells Battery Discharging
    During the process of discharging, SKYRC 6x80 Plus can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.

    Adaptable to Various Type of Lithium Battery
    SKYRC 6x80 Plus is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe series of batteries.

    Fast and Storage Mode of Lithium Battery
    Purposes to charge lithium battery varies, fast charge reduce the duration of charging, whereas store state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.

    Cyclic Charging/Discharging
    1 to 5 cyclic and continuous process of charge>discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the batterys activity.

    Data Store/Load
    The charger can store up to 10 different charge/discharge profiles for your convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.

    Terminal Voltage Control(TVC)
    The charger allows user to change the end voltage.

    Lipo Battery Meter
    The user can check batterys total voltage, the highest voltage, the lowest voltage and each cells voltage.

    Motor RPM Tester
    Users connect the sensor motor and charger with sensor wire, set the pulse width and test the RPM of the motor.

    Servo Tester
    Connect the servo and the charger with wire, change the pulse width value and check whether the servo works or not.

    Re-Peak Mode of NiMH/NiCd Battery
    In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making certain the battery is fully charged, and for checking how well the battery receives fast charges.

    Delta-peak Sensitivity for NiMH/NiCd
    Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the batterys voltage exceeds the threshold, the process will be terminated automatically.

    Automatic Charging Current Limit
    You can set up the upper limit of the charging current when charging your NiMH or NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the AUTO charging mode.

    Capacity Limit
    The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.

    Temperature Threshold
    The batterys internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. ( temp sensor is optional )

    Processing Time Limit
    You can also limit the maximum process time to avoid any possible defect.

    PC Control Software -Charge Master-
    The free Charge Master software gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge date in real-time graphs. And you can initiate, control charging and update firmware from Charge Master. This function is available by connecting optional temperature probe, which is not included in the package.

    APPS for Smart Phone (both iOS and Android)
    Finally, your charger gets its own apps. This charger can be controlled and operated by smart phones.
    Mer info på Engelsk

    Anbefalt tilbehør

    Bronto Lipo-Safe Bag 30x23cm (L)
    3|178|523
    kr 119,-
    Bronto Lipo-Safe Bag (185x75x60mm) (S)
    3|404|523
    kr 135,-
    Fuse Ladekabel - EC5
    3|257|206
    kr 97,-
    SkyRC Temperatursensor
    3|39|235
    kr 85,-
    Fuse Ladekabel - Tamiya
    3|92|206
    kr 97,-
    Fuse Ladekabel - Minitamiya
    3|19|206
    kr 85,-

    Produktanmeldelser

    5 av 6
    Bruker ga kun karakter
    08.05.2014 av CHRISTIAN
    Kort range på bluthoot trekker ned litt,bra app der man kan lage ferdige lade programmer. Følger med ett meget bra ladebrett. Terningkast 5
    Dette hjalp meg 5
    SkyRC Kvalitetslader!
    Bruker ga kun karakter
    25.10.2014 av LARS-ANDRE
    Kjøpte denne når jeg handlet min første rc bil hos elefun, det var egentlig på grunn av tilbakemeldingene dette produktet hadde fått fra andre kjøpere. Og kan si meg enig i at dette er en meget flott lader, som har mange forskjellige funksjoner! Den er enkel og betjene og kan lett overvåkes via pc eller en mobil app. Skal du ha en rimelig og god lader? Kjøp denne uten og angre etterpå! :)
    Dette hjalp meg 3
    Imonerande :-)
    Bruker ga kun karakter
    07.12.2013 av JAN MARTIN
    let å bruke.. Men ein del å setta seg inn i då... Teststasjon for div. Lit lite kabler med, men det har jo Elfun ei god side for å bestille :-)
    Dette hjalp meg 5 3
    Viser 3 / 13 tilbakemeldinger
    Vis alle
    Gi din tilbakemelding

    Flere så også på