Oh man! Full-HD downlink med opp til 1.7km rekkevidde!. Kompatibel med Flame Wheels med ZenMuse H3-2D/3D, Phantom 2 med H3-2D/3D og S900/1000 med Z15 Black Magic/GH4. OBS! Pr dags dato kun kompatibel med Android enheter og fungerer ikke mot original Phantom radio.
LightBridge gir deg lang rekkevidde og Full-HD 1920x1080p@30FPS ned til bakken i et enkelt og lett system. Støtter at 2 radioer koples til, en til styring (10ch) og en til gimbal(6ch), og Lightbridge vil da sende dette sammen med video for å unngå interferens. Støtter video fra alle ZenMuse og har innebygget OSD. Systemet benytter FHSS og DSSS på 100mW slik at det er lovlig for privatpersoner uten radioamatørlisens. Har innebygget 4000mah batteri på mottaker med en driftstid på 4.5t, samt output til Android som FPV skjerm. Krever A2, WKM eller Naza-M v2 flightcontroller. Eneste kompatible Phantom er Phantom 2 med 5.8GHz radio. Det ryktes at det etterhvert kommer en 14dBi antenne (mot 5dBi originalt) som kan gi opp til 5km rekkevidde - men dette er enda ikke bekreftet med reell info/pris/tilgjengelighet.
Features of the DJI Lightbridge:1920×1080@60fps input and 1920×1080@30fps output
Extreme Long Distance Transmission
Less than100mWground unit transmission in full compliance with CE and FCC certification
5dBi omni-directional antenna offers an enormous distance of up to1.7 km (1.05 miles)
Optional 14dBipatchantenna boosts transmission distance tremendously to 5km (3.1 miles)
Multiple Input And Output Connections
AV input
HDMI input
DJI Zenmuse gimbal input (Digital Video/Power Supply/OSD Data)
HDMI HD image output
USB 2.0 image data output for Android phones and tablet synchronization
Built-in Remote Control Link
Uplink remote control transmission and downlink video work simultaneously on2.4GHz.
Remote control data travels to the uplink via the TX-Thru Port at the same time that video is streamed back down all without interference.
Support for two remote controls: one for flight control (10 Channels) and the other for gimbal control(6 Channels). Control signals are received in the air and then transmitted to the flight controller through D-BUS.
When used with a non-2.4G radio transmitter, video only transmission operation is supported. The DJI 5.8G radio transmitter is recommended.
Strong Anti-Jamming Technology
Frequency Hopping Spread Spectrum (FHSS) + Direct Sequence Spread System (DSSS) technology is used for uplink transmission to enhance stability and offer anti-jamming capability.
MIMO multi-antenna technology and OFDM modulation methods along with advanced algorithms are utilized for downlink transmission to enhance data bandwidth, improving dynamic performance and increasing stability even in harsh environments.
Channel interference is constantly monitored during downlink transmission with automatic switching between 8 channels for the best possible signal.
Up to 8 downlinks can be connected for parallel streaming and work independently without interference.
Low Latency Transmission
Maximum latency of up to 80ms
Built-in OSD(On-Screen Display)Function
No additional equipment required for OSD functions when used with A2/WooKong-M/Naza-M V2 flight controllers. Flight parameters will be displayed onscreen.
OSD functionality can be turned off via mobile software for HDMI and Android Output.
Must Work With DJI Multi-Rotor Flight Controllers
DJI A2, WooKong-M and Naza-M V2 flight controllers
Phantom 2, with DJI 5.8G radio transmitter.
Multi-device Operation Mode, Stable And Reliable
A single air unit can transmit to multiple ground units sending video to multiple screens. (Only one of the ground units can send a control signal while additional ground units will only be able to receive a video signal)
Encryption ensures only authorized devices can receive data which can be programmed via mobile device software.
Built-in High Capacity Battery
Ground unit has a built in high capacity 4000mA battery offering up to 4.5hours of use per charge.
Rechargeable through the supplied charger or via a3S~6S Li-Po power battery. A full charge takes approximately1.5 hours.
LED battery level indicator -Also functions as a USB charger for mobile devices prolonging the life of peripheral equipment.
Electromagnetic Interference Shielded Structural Design
The DJI Lightbridge is constructed with an aluminum alloy casing
Extreme internal and external shielding for interference protection.
Se mer info her. (Kommer link til DJI.com straks de får den ut på web.)
| Video Input | HDMI, AV, DVSB(For DJI Gimbals) |
| Supported Formats(HDMI) | 720p50, 720p60, 1080i50, 1080i60, 1080p25, 1080p30, 1080P50, 1080P60 |
| Supported Formats(AV) | PAL25, NTSC30 |
| Radio Frequency | 2.405-2.4835GHz, FCC/CE certified |
| Power supply Ground Unit | DC 11-26V, Built In 4000mah LiPo |
| Power Supply Air Unit | DC 11-26V |
| Dimensions | Ground unit: 125mm x 89mm x 20mm |
| Air Unit: 67mm x 47mm x 20mm |
| Weight | Ground unit: 360g, |
| Air unit: 70g |