Produktinformasjon
Liten og særdelens god skjerm i aluminiumsramme for bruk på gimbal, stativer el. 800x480 oppløsning, 29mm tykk og med HDMI inn (kabel medfølger) samt SDI Inn/Ut. Adapter for montering av Canon LP-E6 batterier bak, eller 12V inn via kabel (medfølger ikke). Vekt 475g, størrelse 134x97x29mm. Solskjerm og monteringsadapter medfølger. Bildene viser skjermen både med sort og sølv aluminiumsramme, vi leverer kun den sorte.
5DII Camera Mode
Peaking Fliter
Highlight the sharpest edge in the image with red,make it easier for photographyers to focus on the main subject
HistogramThe Brightness Histogram is a quantitative tool to check the picture brightness.The feature shows the distribution of brightness in an image as graph of brightness along the horizontalaxis (Left:Dark,Right:Bright) and a stack of the number of pixels at each level of brightness along the vertical axisBMID
BMID
ExposureThe Exposure is used to assist in exposure adjustment in the mode of Zebra Pattern.
False Color
False color can be intuitive observation and calculation in the scene lighting levels,make brightness or lighting value mapping for the displaybrightness of false color, from the darkest to the brightest, in turn display blue, cyan, green, yellow, orange and red
False Color Key To best utilize this feature, you must understand the color chart and have a basic understandingof camera exposure. Normally, when shooting subjects like people, it is common practice to setexposure of faces to the equivalent of approximately 56 IRE. The False Color filter will show thisarea as the color PINK on the monitor. Therefore, as you increase exposure (open the IRIS), yoursubject will change color as indicated on the chart: PINK, then GREY, then a few shades ofYELLOW. Overexposed subjects (above 101 IRE) on the monitor will be shown as RED. Inaddition, underexposed subjects will show as DEEP-BLUE to DARK-BLUE, with clipped-blacksindicated with a FUCHSIA-like color. Lastly, the color GREEN is used to indicate elements of theimage that are approximately 45 IRE.This represents a "neutral" or "mid-level" exposure commonlyused for objects (not people)BMID
Pixel to Pixel
Enables filmmaker to check the image from signal source 1:1 without scaling
Check Field
Under the Blue only mode ,only the blue pixels are used to generate the image,because hue and saturation can be adjusted quickly and accurately.
Image Flip
The U/D,L/R of the image around flip.
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!