Produktinformasjon
Børsteløs servo som kan kjøres direkte på 2-4S LiPo. Ved 11,1V drar den 63kg på 0,12 sek. Ved 14V drar den 76g på 0,11sek.
| Vekt | 89gram |
| Størrelse | 40x20x40mm |
| Spline | 25T Futaba |
| Kraft/hastighet 11,1V | 63kg 0,12sek ved 1cm |
| Kraft/hastighet 14V | 76kg 0,11sek ved 1cm |
| Spenningsområde | 6-16V |
Product details in english
The brushless SHV650 servo is designed for R/C Rock Crawlers, but at home in any vehicle that needs high torque with ultra fast speeds. It is powered directly by a 2S to 4S LiPo battery via JST connection on your ESCs battery plug, eliminating the need for an external BEC! Clean up your wiring, gain space in a tight rig, and enjoy massive performance from the high quality brushless motor and circuitry.
FEATURES:
Water resistant Alloy Case with O-Ring Seals
Waterproofed internals
All steel machined gears with proven pin strength
Upgraded Brushless motor with 200C rated magnets
30cm radio signal lead
JST connector for direct power
2s to 4s LiPo battery compatible, 6 volt to 16.8 volt range
SPECIFICATIONS:
Weight:89g
Dimensions: 40x20x40mm
Spline: 25 tooth (Futaba type) M3 threaded
Torque @ 11.1v: 875 oz/inch
Speed @ 11.1v: 0.12 sec
Torque @ 14v: 1055 oz/inch
Speed @ 14v: 0.11 sec
If using an ESC with a power switch, the battery must be disconnected from the ESC and servo when not in use to prevent damage to the servo and/or battery. Do not connect the servo directly to the battery balance port. Doing so can damage the servo and will void the warranty. Moly (marine) grease is recommended when lubricating the gears. Dielectric grease is recommended inside the back of the servo if looking to increase water resistance for long term submersion.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!